Sledge™: 1/8 Scale 4WD Brushless- Blue

Traxxas Sledge™: 1/8 Scale 4WD Brushless w/ Belted Tires - Blue

SKU: TRA95096-4-BLUE

$769.99

Excl. tax

IN STORE PICK UP ONLY Sledge® 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system, VXL-6s™ power system, and ProGraphix® clipless body.

Redefining 1/8 Scale Off-Road

Sledge (#95076-4) Chassis Three-Quarter View

Engineered. Tested. Built to a higher standard. The all-new Sledge^® is made to exceed your expectations for quality, toughness, and fun. The rock-solid chassis, massive steel drivetrain, ferocious 6s power, and race-inspired handling leave everything else in the dust.

~ Battery and Charger Sold Separately ~

VXL-6s^™ Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link™
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
Velineon^® 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
Traxxas Stability Management^®
- Helps prevents spinouts and loss of control
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
TQi™ 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)

Drivetrain
- Full-time 4-wheel drive
- Heavy-duty steel driveshafts
- Large 8 mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Large 8 mm output shafts
- Steel drive cups
- Easy access bulkheads
GT-Maxx^®Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
Suspension
- Thick 5 mm 6061-T6 aluminum shock towers
- Ultra-tough composite arms
  - Made from our strongest cold-weather material
  - Molded insert for clean look
  - Rear rock deflectors
  - Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs with oversize bearings
- Multiple mounting points for suspension tuning

Chassis
- 3.2 mm ribbed aluminum chassis
  - Formed edges for improved strength
- Thick aluminum T-Bar™ for added rigidity
- High-strength buttressing on shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
Clipless ProGraphix^® Body
- One-handed clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
Steering
- Waterproof 2275 metal gear servo
  - 347 oz-in torque
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
Wheels and Tires
- Huge 6.7″ Sledgehammer all-terrain tires
  - Belted carcass resists ballooning
- Tough 3.8″ black wheels
- Splined 17 mm aluminum axle hubs